Por favor, use este identificador para citar o enlazar este ítem: http://dspace.udla.edu.ec/handle/33000/12298
Tipo de material : bachelorThesis
Título : Automatización de vidrios o láminas PDLC, para el control de climatización de ambientes internos de la escuela de Milenium en la parroquia Yanahurco, cantón Saquisilí, provincia de Cotopaxi
Autor : Amaya Sandoval, Marco Vinicio
Tutor : Valencia Melo, José Luis
Palabras clave : DOMÓTICA;EDIFICIOS INTELIGENTES;AUTOMATIZACIÓN;ECODISEÑO;MATERIALES DE CONSTRUCCIÓN;LAMINAS PDLC
Fecha de publicación : 2020
Editorial : Quito: Universidad de las Américas, 2020
Citación : Amaya Sandoval, M. V. (2020). Automatización de vidrios o láminas PDLC, para el control de climatización de ambientes internos de la escuela de Milenium en la parroquia Yanahurco, cantón Saquisilí, provincia de Cotopaxi (Tesis de pregrado). Universidad de las Américas, Quito.
Resumen : El presente proyecto de investigación está direccionado a la automatizando vidrios o laminas PDLC para el control de climatización de ambientes internos de la Escuela de Milenium Yanahurco, esto se logró gracias a la ayuda de un software de simulación donde se representó la estructura del edificio administrativo de la Escuela del Milenium Yanahurco con su material de estructura. La influencia del software de simulación es la representación de los diferentes materiales que tomamos para la investigación entregando datos para realizar comparaciones con la investigación de campo. En la investigación de campo se realiza un ensayo con la lámina inteligente PDLC escogida para la toma de datos y realizar la comparación con los datos obtenidos en la simulación. Estos resultados ayudan a la programación del sistema de automatización, tomando en cuenta los tiempos críticos, un tiempo donde el ambiente interior del edificio administrativo debe conservar su temperatura para así brindar un confort térmico a los individuos que hacen uso de estos espacios donde la automatización activara a la lámina inteligente PDLC y su estado será opaco ayudando que el calor térmico no se escape, el segundo punto tomado en cuenta es cuando el ambiente interno requiere generar calor la automatización de la lámina inteligente PDLC es cambiar su estado a transparente, para así dejar pasar los rayos UV y todo el ambiente genere calor térmico por medio de la radiación solar. Toda esta detección de temperatura interna se da gracias al sensor LM35 del circuito domótico que se encuentra en automatización con la tarjeta ARDUINO UNO. Se observa la conservación de la temperatura interna en el ensayo el cual es la recreación de un ambiente del edificio administrativo de la Escuela del Milenium Yanahurco, empleando la lámina inteligente PDLC sobre el vidrio de 6mm, generando un ambiente confortable para los usuarios del edificio administrativo.
Descripción : This research project is aimed at automating glass or PDLC sheets for climate control of internal environments of the Milenium Yanahurco School, this was achieved thanks to the help of simulation software where the structure of the administrative building of the Yanahurco Milenium School with its structural materials. The influence of simulation software is the representation of the different materials that we take for the investigation, providing data to make comparisons with the field investigation. In the field research, a test is carried out with the PDLC smart sheet chosen for data collection and comparison with the data obtained in the simulation. These results help the programming of the automation system, taking into account critical times, a time where the interior environment of the administrative building must retain its temperature in order to provide thermal comfort to individuals who make use of these spaces where automation will activate to the PDLC smart foil and its state will be opaque helping that the thermal heat does not escape, the second point taken into account is when the internal environment requires generating heat the automation of the PDLC smart foil is to change its state to transparent, in order to leave UV rays pass and the whole environment generates thermal heat through solar radiation. All this internal temperature detection occurs thanks to the LM35 sensor of the home automation circuit that is in automation with the ARDUINO UNO card. The conservation of internal temperature is observed in the test which is the recreation of an environment of the administrative building of the Millennium Yanahurco School, using the PDLC smart sheet on 6mm glass, creating a comfortable environment for users of the administrative building.
URI : http://dspace.udla.edu.ec/handle/33000/12298
Aparece en las colecciones: Tecnología en Construcción y Domótica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UDLA-EC-TTCD-2020-01.pdf5,53 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons