Por favor, use este identificador para citar o enlazar este ítem:
http://dspace.udla.edu.ec/handle/33000/8334| Tipo de material : | bachelorThesis |
| Título : | Diseño e implementación de un sistema electrónico para el control y reposición del inventario de productos refrigerados en el hogar |
| Autor : | Játiva Mafla, Cristian Guillermo |
| Tutor : | Charro Simbaña, Fausto Francisco |
| Palabras clave : | AGENTES INTELIGENTES;ARTÍCULOS DEL HOGAR;SISTEMAS DE GESTIÓN;CONTROL DE INVENTARIOS |
| Fecha de publicación : | 2017 |
| Editorial : | Quito: Universidad de las Américas, 2017 |
| Citación : | Játiva Mafla, C. G. (2017). Diseño e implementación de un sistema electrónico para el control y reposición del inventario de productos refrigerados en el hogar. (Tesis de pregrado). Universidad de las Américas, Quito. |
| Resumen : | En la actualidad el día a día de las personas cada vez es más ajetreado y una necesidad que toda familia tiene es la alimentación, viéndose afectado el cliente por cuestiones de tiempo y estrés que podría ser causado por la ida y vuelta al supermercado, este prototipo ha sido propuesto como alternativa para facilitar al cliente la adquisición de su despensa... |
| Descripción : | Today the day to day of people is becoming more and more busy and a need that every family has is food, being affected the customer due to time and stress issues that could be caused by the round trip to the supermarket this prototype has Been proposed as an alternative for customer's ease. In the following titling work, the design and implementation of an electronic system for the control and replacement of the inventory of refrigerated products in the home is proposed in order to automate the existing inventory in the refrigerator and report the lack of one of the products. In order to control the data sent from the refrigerator three types of sensors were implemented which are: movement sensors, weight and distance, the motion sensor will be used to detect if one of these eggs was removed, the weight sensor It will be used to measure if a certain product (meat or cheese) is less than the programmed weight and in the case of complying said will be notified, and the distance sensor plays the role of measuring the amount of water (or any other Liquid product) and inform if the quantity is below the programmed, also the prototype will have buttons which when pressed the notification will be sent to the food supplier informing that the same has been finished, also will have a known electronic plate Such as Arduino Uno which will interpret data sent by sensors and Xbee modules which will communicate the data sent from the refrigerator wirelessly to a host for analysis and sent mails in the event of a product failure. The implementation of this project will be done in a model simulating a refrigerator with its proper compartments for the location of electronic modules, and location of products which should be strategically located so that the sensors can the data mentioned above. |
| URI : | http://dspace.udla.edu.ec/handle/33000/8334 |
| Aparece en las colecciones: | Ingeniería en Electrónica y Redes de Información |
Ficheros en este ítem:
| Fichero | Descripción | Tamaño | Formato | |
|---|---|---|---|---|
| UDLA-EC-TIERI-2017-39.pdf | 3,52 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons
