Por favor, use este identificador para citar o enlazar este ítem: http://dspace.udla.edu.ec/handle/33000/13086
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorCarvajal Mora, Henry Ramiro-
dc.creatorQuishpe Sanchez, Vladimir Alejandro-
dc.date.accessioned2021-02-17T22:43:30Z-
dc.date.available2021-02-17T22:43:30Z-
dc.date.issued2020-
dc.identifier.citationQuishpe, V. (2020). Desempeño de detectores multiusuario lineales en sistemas mimo masivo que operan en canales con desvanecimiento de tipo Rice (Tesis de pregrado). Universidad de las Américas, Quito.es_ES
dc.identifier.otherUDLA-EC-TIERI-2020-24-
dc.identifier.urihttp://dspace.udla.edu.ec/handle/33000/13086-
dc.descriptionThe need to attend more devices by ensuring higher data rate speeds with greater reliability and less energy consumption has forced the birth of a new generation of mobile communications, denominated fifth generation (5G), that is based, among other things, on the application of various technologies, among which the use of tens or hundreds of antennas in the receiver stands out and it is known as massive MIMO. This work evaluates the performance of a massive MIMO system that uses the ZF (Zero Forcing) detector and the MMSE (Minimum Square Mean Error) detector in channels with Rice-type fading considering M-QAM modulations. To this end, simulation algorithms were implemented in the Matlab software in order to generate bit error rate (BER) curves as function of the signal-to-noise ratio. Furthermore, these curves were obtained by modifying the system operating parameters such as the number of receiving antennas, the modulation order (M-QAM), and the power of the line-of-sight component (LOS) of the Rice channel. The results show that the MMSE detector achieves a lower BER than the ZF detector, this is because the MMSE detector reduces the mean square error between the transmitted bits and estimated bits by the receiver and makes it the best candidate in the presence of noise, this improvement is greater when the number of antennas in the receiver increases. In addition, it is evident that the use of 64-QAM improves the transmission rate, but the performance of the system degrades because this modulation is more susceptible to noise.en
dc.description.abstractLa necesidad de atender a más dispositivos garantizando velocidades de datos más altas con una mayor confiabilidad y consumir menos energía ha obligado al nacimiento de una nueva generación de comunicaciones móviles, denominada de quinta generación “5G” que se basa, entre otras cosas, en la aplicación de diversas tecnologías entre las que destaca el uso de decenas o cientos de antenas en el receptor, y se conoce como MIMO masivo...es_ES
dc.format.extent60 p.es_ES
dc.language.isospaes_ES
dc.publisherQuito: Universidad de las Américas, 2020es_ES
dc.rightsAtribución-NoComercial-SinDerivadas 3.0 Ecuador*
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/ec/*
dc.subjectDESARROLLO TECNOLÓGICOes_ES
dc.subjectTECNOLOGÍA 5Ges_ES
dc.subjectINTERNETes_ES
dc.subjectTASA DE BITSes_ES
dc.titleDesempeño de detectores multiusuario lineales en sistemas mimo masivo que operan en canales con desvanecimiento de tipo Ricees_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Ingeniería en Electrónica y Redes de Información

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UDLA-EC-TIERI-2020-24.pdf2,57 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons