Por favor, use este identificador para citar o enlazar este ítem: http://dspace.udla.edu.ec/handle/33000/11528
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorQuel Hermosa, Edwin Guillermo-
dc.creatorAndrango Álvaro, Diego Marcelo-
dc.date.accessioned2019-09-24T18:51:19Z-
dc.date.available2019-09-24T18:51:19Z-
dc.date.issued2019-
dc.identifier.citationAndrango Álvaro, D. M. (2019). Diseño y simulación de una red MPLS utilizando equipos Mikrotik y el emulador GNS3 en entornos PYMES (Tesis de pregrado). Universidad de las Américas, Quito.es_ES
dc.identifier.otherUDLA-EC-TIRT-2019-09-
dc.identifier.urihttp://dspace.udla.edu.ec/handle/33000/11528-
dc.descriptionThe present titration work is based on the design and simulation of an MPLS Multiprotocol Label Switching network using MikroTik equipment and the GNS3 Graphic Network Simulation emulator in PYMES environments with the aim of transporting data in a fast and reliable way and demonstrating that MikroTik equipment can and has the same capacity than the brands positioned in the telecommunications area. The MPLS network consists of MikroTik routers in their entirety. In the core part, two P Core Provider allow the forwarding of MPLS packets. It should also be noted that the core equipment P and the access equipment PE Edge Provider communicate through the Interior Gateway protocol OSPF Open Shortest Path First. In the access, part consists of three PE teams responsible for carrying out packaging and unpacking MPLS. Additionally, they are responsible for layer 3 routing through VPN L3 Virtual Private Network, VRF Virtual Routing and Forwarding and the propagation of routes through the BGP protocol Border Gateway Protocol. Finally, there are 3 CPE Custom Premise Equipment routers installed in the client part. The first router performs the Matrix function, where static routes have been configured to reach the other two PE Branches, while in the branches it was carried out the configuration of a default route so that they can reach the Matrix.en
dc.description.abstractEl presente trabajo de titulación se basa en el diseño y simulación de una red MPLS Multiprotocol Label Switching utilizando equipos MikroTik y el emulador GNS3 Graphic Network Simulation en entornos PYMES con el objetivo de transportar datos de una manera rápida y confiable y demostrar que los equipos MikroTik pueden y tienen la misma capacidad que las marcas posicionadas en el mercado de las telecomunicaciones. La red MPLS consta de routers MikroTik en su totalidad. En la parte de core existen dos equipos P Core Provider que permiten el reenvío de paquetes MPLS. Cabe indicar también que los equipos de core P y los equipos de acceso PE Edge Provider se comunican mediante el protocolo de Gateway Interior OSPF Open Shortest Path First. En la parte de acceso consta de tres equipos PE encargados de realizar en empaquetado y desempaquetado MPLS. Adicionalmente se encargan del ruteo de capa 3 mediante VPN L3 Virtual Private Network, VRF Virtual Routing and Forwarding y la propagación de rutas mediante el protocolo BGP Border Gateway Protocol. Finalmente, los 3 routers CPE Custom Premise Equipment instalados en la parte del cliente. El primer router realiza la función de Matriz, en donde se ha configurado rutas estáticas para poder alcanzar los otros dos PE Sucursales, mientras tanto en las sucursales se realizó la configuración de una ruta por defecto para que puedan alcanzar la Matriz.es_ES
dc.format.extent88 p.es_ES
dc.language.isospaes_ES
dc.publisherQuito: Universidad de las Américas, 2019es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectDISEÑO DE REDESes_ES
dc.subjectELECTRÓNICA Y TELECOMUNICACIONESes_ES
dc.subjectTRANSMISIÓN DE DATOSes_ES
dc.subjectGATEWAYes_ES
dc.titleDiseño y simulación de una red MPLS utilizando equipos Mikrotik y el emulador GNS3 en entornos PYMESes_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Ingeniería en Redes y Telecomunicaciones

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UDLA-EC-TIRT-2019-09.pdf1,8 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons