Por favor, use este identificador para citar o enlazar este ítem:
http://dspace.udla.edu.ec/handle/33000/7518| Tipo de material : | bachelorThesis |
| Título : | Desarrollo de una guía para la optimización de recursos económicos y energéticos en edificios usando redes de control |
| Autor : | González Arcos, Pablo Daniel |
| Tutor : | Chinchero Villacís, Héctor Fernando |
| Palabras clave : | SISTEMAS AUTOMÁTICOS DE CONTROL;REDES INSTALACIONES;CONSERVACIÓN DE LA ENERGÍA |
| Fecha de publicación : | 2017 |
| Editorial : | Quito: Universidad de las Américas, 2017 |
| Citación : | González Arcos, P. D. (2017). Desarrollo de una guía para la optimización de recursos económicos y energéticos en edificios usando redes de control (Tesis de pregrado). Universidad de las Américas, Quito. |
| Resumen : | En la actualidad el consumo innecesario de los recursos energéticos es una realidad que afecta a la economía en general, provocando molestias económicas en los hogares a nivel mundial por falta de control en la parte energética... |
| Descripción : | Currently the unnecessary consumption of energy resources is a reality that affects the economy in general, causing economic discomfort in the world is homes due to lack of control in the energy sector. As a result of the lack of control, negative consequences such as excessive consumption, poor distribution of lighting, and poor use of both energy and economic resources are obtained. For this reason, in this project a detailed analysis of the monthly consumption of a company Bank Procredit SA is carried out, in order to be able to observe monthly consumption and in what part could be optimized these resources with the implementation or change of technology Current system. First we will perform an in-depth analysis of all the luminaire and electronic devices that exist in the bank, detailing by type of luminaire, power, and in the electronic devices detailing by type of device and consumption so as to be able to make a calculation of how much energy consumes each floor. The second stage consists of proposing a technological solution to the current problems that can be evidenced in the Bank as: motion sensors for the control of luminaires in corridors or areas that should not always be lit, change the type of lighting to a More optimum, change the current sockets to avoid consumption of the SatndBy, propose a centralized system for the illumination so you can have a control on the lighting on and off. The third stage will be to make a Cost-Benefit table to see if the proposed technological solutions are feasible and optimal for the optimization of resources. In order to be able to develop a guide that facilitates the application of these optimization techniques. |
| URI : | http://dspace.udla.edu.ec/handle/33000/7518 |
| Aparece en las colecciones: | Ingeniería en Electrónica y Redes de Información |
Ficheros en este ítem:
| Fichero | Descripción | Tamaño | Formato | |
|---|---|---|---|---|
| UDLA-EC-TIERI-2017-06.pdf | 3,08 MB | Adobe PDF |  Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons
