Por favor, use este identificador para citar o enlazar este ítem:
http://dspace.udla.edu.ec/handle/33000/8357| Tipo de material : | bachelorThesis |
| Título : | Diseño e implementación de una red multiservicios para la infraestructura tecnológica de la empresa Bitlogic S.A. |
| Autor : | Pillajo Sambachi, Jorge Luis |
| Tutor : | Ubilla González, Ricardo Xavier |
| Palabras clave : | DISEÑO DE REDES;RED MULTISERVICIOS;INFRAESTRUCTURA TECNOLÓGICA |
| Fecha de publicación : | 2017 |
| Editorial : | Quito: Universidad de las Américas, 2017 |
| Citación : | Pillajo Sambachi, J. L. (2017). Diseño e implementación de una red multiservicios para la infraestructura tecnológica de la empresa bitlogic S.A. (Tesis de pregrado). Universidad de las Américas, Quito. |
| Resumen : | El presente proyecto desarrolla el diseño y la implementación de un sistema multiservicios basado en estándares de cableado estructurado para la empresa BITLOGIC S.A... |
| Descripción : | This project develops the design and implementation of a multiservice system based on structured cabling standards for the company BITLOGIC S.A. For the development of the project has been conformed five chapters, here is a brief description of each one of them. Chapter 1: Describes the concepts on which the development of the project is based; Theoretical fundamentals of telecommunications networks, multi-service networks, norms and standards of structured cabling and subsystems thereof. Chapter 2: Information on the current status of the companys network infrastructure, network service, servers, terminal equipment and LAN traffic is collected. Chapter 3: The design of the multi-service network is developed in this chapter, based on the standards and standards of structured cabling, the migration of the currently installed telecommunications rack and the addition of new network points and video surveillance as a new network service. The cost-benefit analysis of the project is also found in this chapter. Chapter 4: The implementation of the project is described in this chapter, here is evidence of the installation of network infrastructure, configuration of equipment, commissioning of network services and functional tests. Chapter 5: Finally in this chapter, the conclusions and recommendations are drawn up, which are based on the implementation process of the multi-service network. In the section comprised of annexes, the datasheet of the most important devices used in the design of the multiservice network is collected. |
| URI : | http://dspace.udla.edu.ec/handle/33000/8357 |
| Aparece en las colecciones: | Ingeniería en Redes y Telecomunicaciones |
Ficheros en este ítem:
| Fichero | Descripción | Tamaño | Formato | |
|---|---|---|---|---|
| UDLA-EC-TIRT-2017-34.pdf | 9,61 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons
