Por favor, use este identificador para citar o enlazar este ítem:
http://dspace.udla.edu.ec/handle/33000/7941
Tipo de material : | bachelorThesis |
Título : | Desarrollo del planning de la red LTE con microceldas en banda 4 y macroceldas en banda 28 para un clúster ubicado en la zona norte de Quito. |
Autor : | Larco Zambrano, Gianela Dayana |
Tutor : | Ubilla González, Ricardo Xavier |
Palabras clave : | TECNOLOGÍAS DE LA COMUNICACIÓN E INFORMACIÓN;DISEÑO DE REDES;TELECOMUNICACIONES;CLÚSTER;QUITO-ECUADOR |
Fecha de publicación : | 2017 |
Editorial : | Quito: Universidad de las Américas, 2017 |
Citación : | Larco Zambrano, G. D. (2017). Desarrollo del planning de la red LTE con microceldas en banda 4 y macroceldas en banda 28 para un clúster ubicado en la zona norte de Quito. (Tesis de pregrado). Universidad de las Américas, Quito. |
Resumen : | El presente trabajo de titulación está centrado en el desarrollo del planning de una red LTE con microceldas en banda 4 y macroceldas en banda 28 para un clúster ubicado en la zona norte de Quito... |
Descripción : | The present project is about of development of a LTE planning network working with microcells in band 4 and macrocells in band 28 for a cluster located at the north of Quito. The design of this network is delimited in a cluster at the north of Quito which is conditioned from the north by the street Galo Plaza Lazo, to the south by the Av. 17 of March, to the east by the Duchicela street and the west by the avenues Panamericana Norte and Simón Bolívar. Before beginning the development of the planning, it was determined the quantity of users of the radio bases from the company CNT E.P which work with the HSDPA technology, to this way it was defined the zones in the cluster where is necessary Band 28 or band 4 to achieve a balance of users and good levels of RSRP. Once the location of the existing and new radio bases was defined, the physical and logical parameters that refer to the carrier frequencies and EARFCN, the nominal plan of the radio bases, the downlink reference signal power, the PCI (Physical Cell Identify), the TA (Tracking Area), and the reports for triggering a handover measurement. These parameters were configured in the Atoll software to simulate the coverage achieved in the cluster using the parameters defined in the planning for both bands. |
URI : | http://dspace.udla.edu.ec/handle/33000/7941 |
Aparece en las colecciones: | Ingeniería en Electrónica y Redes de Información |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UDLA-EC-TIERI-2017-23.pdf | 8,39 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons