Por favor, use este identificador para citar o enlazar este ítem: http://dspace.udla.edu.ec/handle/33000/2727
Tipo de material : bachelorThesis
Título : Diseño de un sistema de audio distribuido de voltaje constante automatizado para la Sede Queri de la Universidad de las Américas
Autor : Campo Góngora, Diana Berenice
Tutor : Ferrández Motos, Héctor
Palabras clave : SISTEMAS DE VOLTAJES;ALTAVOCES;CONEXIÓN DE LA CARGA;ESPACIAMIENTO DE ALTAVOCES
Fecha de publicación : 2015
Editorial : Quito: Universidad de las Américas, 2015
Citación : Campo Góngora, D. B. (2015). Diseño de un sistema de audio distribuido de voltaje constante automatizado para la Sede Queri de la Universidad de las Américas. (Tesis de pregrado). Universidad de las Américas, Quito.
Resumen : Este proyecto de titulación tiene como objetivo principal el diseño de un sistema de audio de voltaje constante automatizado para los bloques 1, 3, 4 y 6 la sede Queri de la Universidad de Las Américas...
Descripción : This titling project is main objective is the design of an audio system automated constant voltage for blocks 1, 3, 4 and 6 Queri headquarters of the University of the Americas. The automation system consists of three phases: a) Sectorization or zoning. b) Change the playback level of the system depending on the level of background noise. c) Interconnection emergency system with distributed audio system delivering voice messages. Sectorization or zoning is achieved with the use of an automation module for each sector or zone. Moreover, the change in the level of reproduction is possible with the use of a microphone that picks up the signal from background noise and going through an automatic process of amplification or attenuation through TDA7284. Finally, for the interconnection of the emergency system with the distributed audio system it is simulated a smoke detector using a pushbutton, treating emergency signal is processed with the ARDUINO UNO R3 board, when the button is pressed the system unifies, that means that all areas emit the emergency message. For the design of the system, is essential to evaluate the initial acoustic conditions of the enclosures, giving us valuable information for the calculation of the speaker placement points. The results of the research and implementation of the prototype indicate that it is possible to automate a distributed audio system constant voltage according to the needs of each block.
URI : http://dspace.udla.edu.ec/handle/33000/2727
Aparece en las colecciones: Ingeniería de Sonido y Acústica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UDLA-EC-TISA-2015-03.pdf5,48 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons